ALPS Mountaineering Trail Tent

Saving weight is one of the biggest factors in choosing gear for your backpacking trips. Weighing in at less than 4 lbs., the ALPS Mountaineering Trail tent pitches using one of your trekking poles.

Features

• 38 sq. ft. of floor area plus 12 sq. ft. of vestibule area provides a spacious tent with room for you and your backpacking companion or every last bit of your gear
• Tent can be set up quickly by staking out the corners and adjusting a trekking pole inside, or alternatively you can hang the tent by the top loop to create more internal room
• Tent design has closable vents near the top and a 360° vent on the bottom that can be adjusted to increase or decrease airflow via the 2-point tensioning system for each stake
• 360° mesh ventilation protected by the weatherproof overhang; closable vents are positioned near the peak
• 2-point tensioning system with sliding aluminum ring
• Works with any trekking pole that extends to 51 in. or longer (trekking pole not included)
• Top loop allows for hanging the tent instead of using a trekking pole for support
• 75-denier 185T polyester tent skin with 1,500 mm coating resists UV rays and stays taut
• Polyester taffeta floor with 3,000 mm coating and sealed seams
• Spacious vestibule and mesh door with #8 zipper
• Includes 7075 aluminum stakes, guy ropes and trekking pole tip cover (trekking pole not included)
• Closeout

Imported.

Technical Specs

Best Use	Backpacking
Seasons	3-season
Sleeping Capacity	2-person
Minimum Trail Weight	3 lbs. 10 oz.
Packed Size	6.5 x 16 inches
Floor Dimensions	84 x 76 inches
Floor Area	38 square feet
Vestibule Area	12 square feet
Peak Height	53 inches
Number of Doors	1 door
Canopy Fabric	75-denier 185T polyester with 1,500 mm coating
Floor Fabric	Polyester taffeta with 3,000 mm coating and sealed seams
Footprint Included	No
Design Type	Nonfreestanding